Most of you who have experienced ASUS Motherboard Error Code 40 on their window computer will probably want a solution rapidly, as your ASUS Laptop/PC just stops working. The problem occurs, when you are trying to run your laptop with Windows 8 64-Bit:

ASUS  Maximus VI Hero

i7-4770k

GTX 690

16 GB 2133 MHz Corsair Vengeance Pro — Set to 2133mhz in BIOS.

The Asus Error Code 40 is the most common error of ram not seated properly. Other times the system will be able to read the memory, but could cause other errors such as crashing, freezing, and/or corruption of data being read or written, and motherboard, etc. However, several reasons are attributed towards the problem, and then you just need to resolve the problem immediately, before your system will create a big problem for you. Then don’t panic about it. Well, here the blog will explain you the simple steps on How to Fix ASUS Motherboard Error Code 40? So you require following the steps to solve the problem quickly.

Solutions to Fix ASUS Motherboard  Error Code 40 :-

Solutions 1:- Reboot Your ASUS System

The first step is to try to burn it to a CD or format a USB to install it. The installer will do the formatting for you. Boot from the USB/CD. You may need to change your boot order in the BIOS.

To stopping you just need to press the stop key (If you are shortage of time to resolve this issue, 1-2 times should be okay. You just press the stop key, once you have seen it pass the amount of times you want it to).

Check the error still persists, then move to the next solution.

Solution 2:- RAM is Seated Properly

You will need to check that the RAM is seated properly or not. Inspect the ram slot for a bent pin or any other object blocking the ram. Also, make sure that you have RAM is its compatible with your system.

If it’s ok then you should move to the next solution.

Solution 3:- BIOS Update

• ASUS USB BIOS Flashback: a truly revolutionary hardware-based update solution. The USB BIOS Flashback offers the most convenient way ever to update the BIOS. It allows users to update new UEFI BIOS versions, even without hardware such as a CPU or DRAM installed into the motherboard.
• Then you need to just plug in a USB flash drive containing the BIOS file, and then press the “BIOS Flashback” button for three-four seconds with the power supply connected. Then UEFI BIOS will then automatically update without requiring further interaction. Hence, you can hassle-free updating for the ultimate convenience.

Solution 4:- Perform Scan Disk Task

You need to run a scan disk with the switch, forcing it to do a full scan and repair of the file system. It should work fine after the scan is completed.  The scanning will help to resolve Bad memory in the system, or a hard drive developing errors, or Unexpected or improper shut down of the system.

After performing the steps, I hope your issue is fixed.

In case, still this error exists, then you should connect with knowledgeable ASUS support professional for immediately help to fix ASUS Motherboard Error Code 40.

Related post: Get Asus Laptop Motherboard Repair Service USA

Need Online Help! Dial ASUS Customer Service Phone Number Now

Dial ASUS Customer Support Number, which work 24×7/365 days for your online help and will straightforwardly connect you with the team of ASUS customer support. The talented and highly skilled technicians will give you a complete guide to speedily fix this ASUS issue. Also, by experts help, you will grab the consistent, easy and accurate solutions to fix kind other ASUS Laptop, Computer related technical problems. Hence, now dial this toll-free number and get the hasty support & further assistance to ASUS queries.